PickBeam - Technical Details

Electrical Data

The control unit for controlling up to 5 rows of picks and up to 15 metres per row (max. 1000 LEDs).

Power supply

5V DC

Light strip

RGB light strips

Power consumption

Bis zu 15A (maximal)

Power consumption

Depending on connected components (e.g. LED lines); recommended external power supply for extensions

Communication Interfaces

WLAN

2.4 GHZ (IEEE 802.11 b/g/n)

LAN

10GBe

Protocol

Support for Wi-Fi, MQTT for IIoT communication, HTTP/HTTPS for web interfaces.

Safety

WPA3 encryption, TLS 1.3 for secure connections, device authentication via certificates.

Sensors and Measurements

Internal sensor

BME680 (Bosch Sensortec)

• Measured variables: Temperature (-40 °C to +85 °C), relative humidity (0% to 100%), air pressure (300 hPa to 1100 hPa), gas resistance (VOC detection).

• Accuracy: Temperature ±1 °C, humidity ±3%, pressure ±1 hPa.

External Sensors

Up to 2 additional sensors for adhesive devices (temperature and humidity).

• Interface: I2C or analogue, compatible with common sensors such as DHT22 or similar.

Refresh rate

Configurable, default setting is every 10 seconds.

Lighting and displays

RGB LED lines

5 independent lines

• Maximum length per cable: 5 m (standard), extendable to 10 m with special external power supply.

• LED density: 144 LEDs/m (e.g. WS2812B compatible).

• Colour space: RGB, 24-bit colour depth.

• Control: Via PWM or digital protocols (e.g. NeoPixel).

Status-LEDs

• Status LED: Multicoloured (RGB) for operating states (e.g. green: OK, red: error).

• System LED: For system status (e.g. flashing during boot-up, steady during operation).

Push button with LED

Up to 4 buttons, each with integrated LED for status display (e.g. on/off, configuration).

Mechanical conditions

Housing

Suitable for industrial use, protection class IP54 (dustproof and splashproof).

Dimensions

100 mm x 60 mm x 30 mm (estimated, depending on the final design).

Environmental conditions

Operating temperature

-20 °C to +60 °C.

Storage temperature

-40 °C to +85 °C.

Assembly

DIN rail or wall mounting.

Interfaces and extensions

Inputs/Outputs

• 5 x RGB LED outputs.

• 2 x sensor inputs (temperature/humidity).

• 4 x push-button inputs with LED outputs.

Extension

Special power supply for LED extension to 10 m per line.

Firmware

Updateable via OTA (Over-The-Air) via Wi-Fi.

Certifications and compliance

EMV

EN 55032/55035

Safety

EN 62368-1

RoHS

Compliant

More

CE, FCC (depending on the market)